Do you have a truck?

SPREADERS

Hi-Way

E2020xt Heavy Duty SpreaderE2020xt

  • Heavy duty 10-gauge hopper and stakes with 7-gauge conveyor bottom panel and sills. Stainless steel units are constructed of a 12gauge hopper and stakes with 10-gauge conveyor bottom panel and sills.

  • 24" wide roller chain conveyor with 3/8" x 1 W' crossbars for spreading deicing materials.

  • A fully-enclosed height-adjustable hydraulic-drive spinner with two internal deflectors, a 20" diameter spinner disc including six bolt-on
    hardened fins and a four-section baffle to control material application.

The E2020xt is the spreader of choice among municipalities for winter deicing. Mounted on a dump body or truck chassis. It features a gearcase assembly that quickly removes for faster service.

Website link

E2500 Heavy Duty SpreaderE2500

  • Heavy duty 7-gauge bottom panel and 10-gauge body and longsills. Unpainted 304 stainless steel units are made of 12-gauge body,
    stakes and sills with 10-gauge conveyor bottom panel.

  • 24" wide conveyor chain with W' x 1 W' crossbars for spreading deicing materials. The conveyor is driven with a 50:1 gear reduction
    drive with a hi-torque/low-speed hydraulic motor.

  • Heavy-duty spinner hopper broadcasts material up to 40' with a hydraulic drive, 20" disc and six bolt-on spinner fins.

The Hi-Way E2500 incorporates heavy-duty construction and a spinner hopper that accommodates spreading, dumping and storage.

Website link

SA-6C & SA-9 Tailgate SpreaderSA-6c

  • Heavy duty 7-gauge cover/back plate and trough with X" endplates

  • 6" or 9" diameter auger with 3/8" or 5/8" helicoids flighting welded to heavy-duty 2 Yz" pipe.

  • 18" polyurethane spinner disc with six fins provides a uniform spread pattern

  • Direct drive hydraulic motor eliminates chain and sprocket or gear case maintenance

The TGC-18 reversible tailgate conveyor discharges material to the right or left hand side for repairing edge ruts, filling trenches, and restoring road shoulders. Quick disconnect pins permit removal and attachment without the use of tools.

Website link

TC SpreaderTGC-18 Tailgate Spreader

  • Heavy duty 7-gauge trough, bottom and endgates. Both endgates adjust for controlled material flow and swing open for high-speed dumping .

  • 18" wide belt-over-chain conveyor riveted to X" x 1" cross bars for either right or left hand discharge.

The TGC-18 reversible tailgate conveyor discharges material to the right or left hand side for repairing edge ruts, filling trenches, and restoring road shoulders. Quick disconnect pins permit removal and attachment without the use of tools.

Website link

Super P Medium Duty SpreaderSuper P

  • Heavy-duty hopper with 12-gauge sides and ends

  • lO-gauge conveyor bottom and sills

  • Conveyor system with heat-treated, self-cleaning pintle conveyor chain with 3/8" x y.;" chain bars positioned on approximately 5"
    centers.

  • Super P: 10.5 HP Briggs & Stratton engine with in-cab controls; Super P HC 11.0 HP Honda engine with in-cab controls

The Hi-Way E2500 incorporates heavy-duty construction and a spinner hopper that accommodates spreading, dumping and storage.

Website link

Pre-Wet SystemsSuper P

  • High-density polyethylene with UV protection

  • Serviceable bulkhead connectors

  • Top splash proof vent

  • Liquid relief valve with gauge

A wet system to pretreat your material before it hits the spinner.

Website link

Meyer

Meyer PolyHawk SpeaderPolyhawk

  • Rotationally Molded Polyethylene hopper

  • Highest tensile strength drag chain

  • Marine-grade actuator

  • Stainless steel external baffle adjustment rods

Meyer PolyHawk is an 8 foot long Corrosion Resistant Conveyor V-Box Spreader that fits most standard 3/4 to 1-ton pickup truck beds. The one-piece polyethylene hopper has a 2.0 cubic yard capacity and comes with a limited 10-year warranty (applies to hopper only). The polyhawk comes fully assembled and includes top screen. The stainless steel conveyor assembly resists corrosion and minimizes maintenance. The swing up spinner assembly simplifies clean out and storage. All these features (and more) provide all the performance of conventional V-Box spreaders with less weight, longer life and less maintenance.

Website Link

MDVMeyer MDV Meduim Duty Spreader Medium Duty - Large Capacity

  • Wireless Controls

  • Electric Drive

  • Swing up Spinner

  • Patented Fork Pockets

Meyer MDV Meduim Duty Spreader Meyer's Medium Duty V-Box Spreader is designed to bring volume and versatility to your vehicle fleet with increased material capacity for the heavy duty sized trucks (15,000+ GVW). The MDV provides the flexibility of a medium duty municipal vehicle with the capacity of a larger spreader, which means less time loading and more time spreading.

Website Link

Meyer 350S and 750S Blaster Spreaderblaster

  • Available in 350 lb. and 750 lb. capacities

  • Variable speed controller for precise material spread pattern

  • Spread patterns up to 40 feet

  • Mounting systems available to fit SUV's, light truck and 1/2 ton+ vehicles

Meyer 350S and 750S Blaster Spreader features a 1/2 hp direct drive motor that gives you the auger power when and where you need it. The Blaster motor and controller deliver a continuous 40 amperes during normal operation and surges to 70 amperest when the "blast" feature is pressed to grind through rock salt, calcium chloride and other ice melting materials. The low maintenance polyethylene hopper and 304 stainless steel spinner are built to provide years of service. The vibrator kit (standard on 350S and 750S) allows for spreading a 50/50 blend of rock salt and sand or sand only. ROC 3/5 year warranty is available.

Website Link

Meyer Hotshot Broadcast SpreadersHotshot

  • Large, heavy duty Nylatron GS (Teflon impregnated and greaseless) gears for superior durability and a quick release gear cover for easy servicing

  • Axle and wheel bearings/bushings provide self-lubrication with excellent wear and load carrying performance

  • 1.3 cubic foot polypropylene hopper has a 70 lb. capacity which converts to up to 1 1/2 bags of fertilizer/Icemelt

  • Fitted, see-through cover keeps the weather out and the material in

  • 10" pneumatic tires minimize push effort

  • Powder coated frame is welded and epoxy coated for durability

  • Spreads up to 12' to maximize productivity

Meyer Hotshot Broadcast Spreaders are compact, tough and built to handle the extreme temperatures, moisture, and corrosive materials typically found in year-round grounds maintenance use. The Hotshot is specifically designed for Topdress sand, Icemelt, Limestone and Fertilizer applications.

Website Link